Home

About Us

Promotional Offer

Services

Data Centre Audits and Reports

Data Centre Decontamination / Maintenance

Internal Server/Equipment Decontamination

Electrical/Electronic Equipment Cleaning

Zinc Whisker Remediation

Post Construction / Installation Cleaning

Ceiling Void Cleaning

Technical Restoration

Office Equipment Cleaning

Equipment used in the cleaning process

Clean Room Products

Frequently Asked Questions

Contact

Post Construction Decontamination

                      

Many construction companies do not consider or are not concerned regarding the contamination of data centres, communication rooms and equipment during construction. They just build the room and worry about the cleaning at the end of the building project lifecycle.

 

To enable project completion by handover date, many tasks must be completed simultaneously. This leads to equipment being installed in an environment that is not suitable, which then leads to severe contamination of the equipment. Most times the equipment is brand new prior to installation and by practical completion of the project the equipment is in very poor condition. If warranty service is required due to issues, the contamination level may lead to the warranty being voided on effectively brand new equipment. This equipment represents a significant investment by the end client and should be treated as such. Otherwise there will be a large restoration cost involved to return the equipment to original condition.

 

Another factor to be considered is upon completed there will be areas of the rooms that are unable to be accessed to be properly decontaminated. This can only be avoided by periodic cleaning throughout the construction project.

 

Please contact us in the planning stages prior to the project to ensure that this does not happen to you. We are able to assist in the planning and contamination control throughtout the project.

 

 

Air Scrubber filter used during project    Typical post construction debris

Concrete debris

Post construction debris 

Dust on top of Distribution board and Racks 

Contaminated equipment

Unsealed concrete floor cleaned prior to sealing and installation of raised floor.

Sealing of concrete surfaces within data centres and communication rooms is one of the best investments to minimise contamination of the room for the entire life of the room. This eliminates errosion of the concrete due to CRAC units and air flow. If you have an existing room we can also provide the concrete sealing solution for you as we have extensive experience in sealing concrete in live rooms.

  Our reputation is our guarantee!!

Over 10 Years Industry Experience

© 2012 Priority Data Services